How To Do A Fake Beard With Makeup

Download Article

Whether it is for wearing apparel-up, a cosplay, or a play, knowing how to make a faux beard can come in handy. Depending on the materials you utilise, you can create a elementary, fake bristles perfect for dressing upwards, to a more realistic beard better suited for cosplay and theatre. Once you know how to make a basic beard, you tin use like techniques to create other pieces, such as a mustache!

one
Cut a 3 by four-inch (vii.6 to 10-cm) piece out of felt for the base of operations of your beard. The exact shape does non matter, but an oval or trapezoid will work the best. You will exist attaching the wool roving to this, then choose a colour that matches your wool.
- For case, if your wool roving is cream-colored, use white or fair felt.
- You can use this method for shorter beards, simply it works the best on longer, gnome-similar beards.
ii
Cut an almond-shaped pigsty in the felt for your oral fissure. Place the felt slice against your face, and feel where your mouth is. If you need to, describe on the felt with a pen. Pull the felt away, then cut an almond-shaped hole out of information technology. It should be big enough for your lips to fit through.
- Trim the top corners of the shape off so that they follow the curve of your mouth and cheeks better.
Advertisement
3
Pull your wool roving into your desired length. Get some wool roving and unravel it to brand a rope. Pull it autonomously widthwise into thinner ropes, and so pull it into 6 to ten-inch (15 to 25-cm) lengths. Make sure that ropes are all equal length.
- Do non cut the wool roving, or you lot will become precipitous ends that won't look natural.
- Y'all tin can find wool roving in craft stores, material stores, and yarn shops. You can also find it online.
- Wool roving is simply wool that has not been twisted into yarn yet.
4
Place a thin weft of roving against the bottom of the mouth opening. Gather a 1-inch (2.5-cm) broad piece of wool roving, and place the terminal ¹⁄₂ inch (1.3 cm) under the almond mouth opening. Make sure that the longer function of the wool is pointing up so that information technology covers the rima oris and the last ¹⁄₂ inch (1.3 cm) is pointing down.
- Repeat this stride one to 2 more times until the entire lesser edge of the rima oris is covered.
- You will be flipping the longer part of the wool down after you sew it. This will hide the seam.
5
Sew or glue the wool roving down. Thread your sewing machine with a thread colour that matches the wool. Gear up it to a straight sew together and a short stitch length. Begin sewing at the bottom-left corner of the oral fissure and terminate sewing at the bottom-right corner.
- Backstitch when y'all start and finish sewing to preclude the thread from unraveling.
- Run up as close as possible to the bottom edge of the mouth. Do not run up across the top edge.
- Y'all can use hot glue, tacky mucilage, or cloth gum for this step if you don't know how to stitch.
vi
Flip the wool roving so that information technology hangs down and covers the mouth opening. One time you have finished sewing, cut off any loose or hanging threads. Accept the longer part of the wool roving that is covering the mouth, and pull it down so that yous can see the mouth it once again. This should hide the 1/2-inch (1.iii-cm) part of the wool roving that you sewed down.
- If y'all used glue, wait for the glue to dry out outset. Hot gum sets quickly, just fabric mucilage will take 15 to 20 minutes. Tacky glue may take several hours.
7
Tie a piece of string around a length of roving for the mustache. Pull off a length of wool roving for the mustache--it can exist as long as yous want information technology to be. Cut a slice of thread the same color as the roving, then wrap it a few times around the centre of the wool roving. Tie the thread into a tight knot.
- This volition cause the mustache to cinch in the centre and poof out; it volition look more realistic.
8

Glue the mustache to the meridian of the felt piece. Outline the top border of the mouth with hot glue, fabric mucilage, or tacky mucilage, so press the roving into the glue. Make sure that the part yous tied is centered. At this point, yous can besides glue downwards the rest of the beard.
9
Secure a sparse rubberband to each side of the felt slice. Concord the bristles confronting your face up, and so measure around the back of your head, from 1 side of the felt to the other. Cut a thin piece of elastic according to this measurement. Tie a knot in each end, so staple the knots to each side of the felt.
- Alternatively, thread the rubberband through a yarn or tapestry needle, then poke it through the felt. Slip the needle off, and so necktie a knot in the rubberband.
Advertisement

1
Trace a beard shape on the back of a piece of faux fur. Take a slice of fake fur and flip it over so that the back (material) side is facing you. Draw a bristles shape on the textile with a marker, including the rima oris hole.^[1]
- You tin can also use felt instead.^[2]
- Your beard tin be any colour your want, only white, brown, black, gray, or orangish will wait more natural.
ii
Cut the bristles with a craft bract or scissors. Make sure that you cut from the dorsum of the cloth. Slide your scissors through the fur so that y'all don't cut the fibers. You only want to cut the fabric part of the fur, not the fur part. Be certain to cut the mouth hole out too.^[3]
- The oral fissure hole needs to be big enough to expose your lips.
- If you are making a felt beard, employ scissors instead.^[iv]
3
Add an viii-inch (20-cm) elastic to each side of the beard. Cutting an 8-inch (20-cm) long piece of rubberband. Fold information technology in half to make a loop, and then sew together information technology to the top-left corner of the bristles. Make sure that the beard and elastic overlap each other by nearly ¹⁄₂ inch (1.3 cm). Repeat this step for the right side of the bristles.^[v]
- Make sure that you are sewing the elastic to the dorsum of the bristles. If you are working with faux fur, this is the textile side, not the furry side.
- The rubberband needs to exist long plenty to claw around your ears. Yous may need to make information technology longer or shorter depending on the size of your caput.
- Alternatively, you tin can cut a single piece of elastic and sew each cease to each side of the beard. This way, you can pull the elastic over the back of your caput instead of your ears.
4
Cut an identical beard out of matching felt. Discover a piece of felt that's the same colour as your beard. Set your felt or faux fur bristles on pinnacle of the felt. Trace around the beard with a marking, so set it aside. Cutting the felt just inside the lines that yous traced.^[6]
- If you want to brand a simple faux fur bristles, you are washed.^[seven]
- Y'all should do this step if you lot are making a simple felt bristles. A double-layer of felt will be much stronger than a unmarried layer.
5
Pin and sew the second slice of felt to the back of the beard. Flip the bristles over so that y'all tin can run across the back. Identify the felt beard on superlative, covering the elastic. Pin it in identify, so sew effectually the edges using a whipstitch.^[eight]
- Alternatively, you can gum the 2 pieces together using fabric glue.
- If you lot used felt for both pieces, consider sewing effectually it on a sewing motorcar using a straight sew together and a 1/viii to 1/four-inch (0.32 to 0.64-cm) seam allowance.^[9]
Advert

1
Prepare the beard but before you demand to habiliment it. This beard is not reusable. It is very realistic, still, making it ideal for costumes, cosplay, and theatrical productions. Give yourself at to the lowest degree one-half an hr to prepare the beard.
- You can prepare the beard even before, but it wouldn't be a good idea to set it the day earlier. It won't be comfortable to sleep in and information technology will make a mess.
2
Unravel 12 inches (thirty cm) of crepe wool. You tin purchase crepe wool in the doll-making department of some arts and crafts stores and cloth shops, but you may have better luck in a costume store or online. It is a long piece of wool roving (wool that hasn't been spun into yarn) that'south woven into a braid-like rope with string.
- To unravel crepe wool, simply pull on the string and gently unwind the wool.
- for best results, choose a color that closely matches your own. If you can't discover the right color, go a shade darker.
3

Untwist the crepe wool and cut it to your desired length. Gently tug the wool apart to create a wide, thin sheet. Gently pull on the fibers to split a tuft that'due south close to the length you need. Hold the fibers against your mentum, and trim them if needed.
4
Use spirit mucilage under your mentum and expect one minute. Open up up a bottle of spirit gum. Utilise the attached brush to apply a thin layer of spirit gum to only under your mentum, right where the bone is. Wait one minute for the spirit mucilage to get tacky.
- Only apply a small patch of spirit glue, well-nigh ⁱ⁄_two inch (1.3 cm) wide and 1 to ii inches (2.5 to v.1 cm) long.
- You tin can find spirit gum in costume stores and online.
v

Press the crepe wool into place. Find the cut ends of the fibers. Spread them out so that they tin can encompass the area y'all coated with spirit gum. Gently press them against the spirit mucilage. Push the tuft into identify with a wood cuticle pusher or the end of a makeup castor.
six
Repeat the procedure to apply more crepe wool. Use some spirit mucilage to your jaw, so allow it dry for one infinitesimal. Measure and cut the crepe wool, then printing it into place. Work your way along your jaw starting time, then work your way up past your mentum and jaw bone.
- How far upwardly your face you apply the beard is up to yous. You lot can even apply a little on your upper lip to create a mustache.
- Await at pictures of existent beards to get an idea for way and shape.
7
Trim the bristles to your desired length. Chances are, the beard may be uneven in some areas. Use pair of scissors to trim the beard into your desired shape. Again, look at pictures online for ideas on how to cut your bristles.
- Practice not use a beard trimmer or clipper, or the spirit gum will clog information technology upwards. Utilise modest trimming scissors.
8
Apply translucent setting powder over excess spirit gum. This will assist dry out it out and prevent polish. For best results, employ theatrical-form translucent setting powder and a large, fluffy, makeup brush. It comes in loose-pulverization form rather than pressed-powder form. You lot tin can find it in costume stores and online.
- At this signal, you tin finish the rest of your makeup, including foundation, contouring, eyeshadow, etc.
9
Remove the beard with spirit gum remover when you want to take it off. Dip a sponge-tipped makeup brush into spirit gum remover, and then dab the top edge of your bristles. Wait about thirty seconds for the spirit gum to dissolve, then pull the beard away. Echo the process for the adjacent layer of beard until you take everything removed.^[ten]
- Wipe your chin and jaw (wherever you practical the spirit glue) later on with a cotton ball dipped in spirit mucilage remover to become rid of any residue.
- Yous can buy spirit glue remover online and in costume stores. It is usually sold aslope the spirit glue.
Advertizing

Enquire a Question

200 characters left

Include your email address to become a bulletin when this question is answered.

Submit

Friction match the beard colour to your own. If you tin can't detect the right color, go a shade darker.
You can find small swatches of faux fur in the craft store, but a fabric shop volition accept a bigger selection.

Thanks for submitting a tip for review!

Advertizing

Things Y'all'll Need

Felt
Wool roving
Scissors
Sewing auto
Hot gum, fabric glue, or tacky gum
Sparse rubberband

Simulated fur and/or felt
Thin elastic
Sewing pins
Scissors
Needle
Thread

Crepe wool
Spirit gum
Spirit gum remover
Cream-tipped makeup brush
Scissors
Powder brush
Translucent setting pulverization

About This Article

Article Summary 10

To make a fake beard, showtime past getting some crepe wool and spirit gum from your local costume store or online. Then, unravel near 12 inches of the crepe wool by pulling on the cord and unwinding the wool. Next, tug the wool apart to create a wide, thin canvas, and pull the fibers to get the length you want. After that, apply a thin layer of spirit gum but under your chin and expect a minute for it to get tacky before you press the wool into place. Repeat the process to add additional layers of wool forth your jaw and up past your chin. To learn how to use wool roving or faux fur to make your fake beard, keep reading!

Did this summary help you?

Thanks to all authors for creating a page that has been read 58,899 times.

Did this article help you?